Versatile storage that protects the contents and makes it easy to organise and find what you're looking … Read More » A: The total Open Circuit Voltage should be between 35-150V. 1 x POWEROAK SP120 / SP200 cannot charge this portable power station; we recommend 3 x POWEROAK SP120 / SP200. As well as the power station, there’s one one of the largest AC adapters I’ve come across and an assortment of charging cables including an XT90 to aviation plug, a car charging cable again with an XT90 connector on one end and an MC4 to XT90 solar charging cable. I’ll discuss all these accessories shortly. These cables can be stored in the supplied drawstring bag. It does the job but I would have expected something a little more premium for the price of this power station. There’s also a user manual and warranty card. The form factor (case size) is exactly the same between the Delta and the Delta 2, and so is the 1800W of power which can be supplied to your gear. The main change to the newer model is the battery technology which moves from standard lithium-ion to the safer and much longer lasting lithium iron phosphate (LiFePO4) batteries. The new batteries in the Delta 2 can take at least 3000 cycles before dropping to 80% of their original capacity, whereas those in the original Delta would only need ~500 for the same drop.

Ever wondered what a camping blogger chooses to take on a camping trip? See inside my tent … Read More » I confirmed their pure sine wave output, which is important for sensitive electronics, with a graphical multimeter. Flexible Recharge from Solar/Wall outlet/Car/Generator】 Keep your PowerOak AC50S always fully powered whenever you are at home, outdoor explore or on your road trip. Fully recharge your AC50S in 6-6.5 Hrs by AC adapter/generator, about 6-7 Hrs from solar panel (PowerOak SP 120 120 W solar panel, solar charge mode: MPPT), 5 Hrs/2.5 Hrs from 12 V/24 V car. The AC200P is the most powerful power station I’ve tested so far. It will power most household items quite happily and it even ran some pretty heavy machinery in my workshop. It’s worth remembering though that at its maximum 2000W output the sizable 2000Wh battery will still only last just under an hour.

Let's protect our beautiful planet.

Your Safety is Our Concern】 PowerOak AC50S is equipped with auto-level 3 C high rated lithium-ion battery cell which is more reliable with better heat dissipation. It built in B M S multi-protection, protect the AC50S from over-voltage, short-circuit, over-temperature, over-current, etc. Pure sine wave AC inverter can better protect your sensitive devices. ABS+PC V 0 flame retardant materials give you peace of mind. MPPT solar charge controller is installed as the input controller. With the solar panels, the maximum input of 700W / 150V can be achieved, maximising the charging process and fully charging the Power Station within 4 hours. Alternatively, make sure your devices are at least 50% charged, as it takes up more energy to charge devices that are below this limit

The 230V mains power is supplied from an internal pure sine wave 300W inverter, meaning the unit can power up to 2 mains power products with a total wattage under 300W.

We only stock batteries we would use in our own electrical system.

On a day with sunny spells in April in the UK I got a maximum of just under 280W off this setup. If you tap on the PV icon you can see the voltage was around 60V and I was getting around 4.5 to 5A. The AC50S can operate as a light source of its own – there is a switch on the side which fires up a broad light beam. It’s not going to replace a dedicated camping lantern, but is a useful feature and we found that it worked well in a tent. Recharging the AC50S The Outwell Contour Lux is a stunning sleeping bag that's extremely versatile and provides exceptional levels of … Read More » Additionally, the small inverter allows you to power any 230V appliances such as laptops, camera chargers and drone chargers. Where to buy the Poweroak Bluetti AC50S

Our kits include everything you need to fully install each aspect of your system. So whether you're retrofitting solar, or want a full kit for your entire system, we've got you covered. SHOP KITS I tested the 12V DC outputs with an electronic load tester from Kunkin – the KP184. I’ll have a link down below if you want to test your power station. All these ports are regulated so their output won’t decrease as the battery level depletes. Testing 12V 10A ports with Kunkin KP184 load tester Moving on to the USB ports which are also operated under the DC subsystem, the USB-C 60W port supports USB Power Delivery at up to 20V and 3A and will power even decent sized laptops and lots of other tech. As I mentioned earlier I would have expected 100W like on the EcoFlow for more power hungry devices like the latest MacBook Pros, and I’d have preferred an extra USB-C port even if it sacrificed a couple of the standard USB ports. 60W USB-C PD output charging Allpower 500W power station Most of 12V refrigerator required regulated DC 12V. The AC50S features a regulated 12V DC Output, powering your 12V appliances without reduction. I also tested this input with the bench power supply. With a 24V supply you can get just under 200W on this port again at 8.2A.The 4 USB-A ports are still useful and testing them with a load tester I was able to get over the spec’d 3A before the voltage started to drop. 2 x 230V 2000W outputs Campervan electrical systems can be confusing. There are so many options that it’s easy to spend days researching and still not feel confident. Our service makes off-grid energy simple. If you plan to use this powerbank as your primary source of power, we’d definitely recommend purchasing a portable solar panel so you can recharge off-grid. If the prospect of losing power for hours or days at a time concerns you, the Bluetti AC200MAX portable power station offers a very compelling solution. It has the ability to run even large appliances like a refrigerator, high-demand devices like a space heater, and it can charge all your portable electronics. If you tap on next, you can switch the beeping off and configure the date and time. It’s useful to have this set correctly for the fault logging.